Surveillance System Infinova

• Spring loaded top cover
• Rear lock-in latch connection
• Die-cast aluminum
• Indoor/outdoor installations
• IP66 standard
• Easy installation and maintenance
• Cable clamps and installation holes on the housing bottom
• Optional heater and sunshield
• Heater to warm camera and remove dew and fog

V1405-7
Camera housing, indoor/outdoor, 7 inch internal

V1405-7S
Camera housing, indoor/outdoor, 7 inch internal, w/ sun shield

V1405-7SH
Camera housing, indoor/outdoor, 7 inch internal, w/ sun shield & heater, 24 VAC

Recommended Installation Mounts
Wall mount
V1571-W: Wall Mount, H/V adjustable for housing (V1405), 33.07 lbs. (15 kg) load
V1572-W: Wall Mount, Non-Adjustable for housing (V1405, V1406), 121.25 lbs. (55 kg) load
V1573: Mount Adapter, Adds H/V adjustability to V1572-W Wall. Mount for housing (V1405, V1406), 44.09 lbs (20 kg) load
V1574A: Pole Mount adapter for V1571-W
V1574B: Pole Mount adapter for V1572-W

Note: V1572-W should work with V1573.

Camera Mounting:
Multiple installation holes available on the camera supporting board, which is installed on the two narrow slots in the bottom groove for easy disassemble
Internal Usable Dimensions: V1405-7 (L×W×H): 6.85"×3.54"×2.85" (174 mm×90 mm×72.5 mm)
Window: 0.16" (4 mm) thick
Window Dimensions (W×H): 2.64"×2.24" (67 mm×57 mm)
Cable Input: Two compressed cable glands with the max diameter of 0.48" (12 mm) available on the bottom
Lock-in Latch: Stainless steel; padlock (not included) can also be used to secure
Input Voltage: 24 VAC, 50/60 Hz
Power Consumption: 25 W
Auto Controlled Temperature:
Heater: Turns on at 46°F ± 9°F (8°C ± 5°C); Turns off at 68°F ± 9°F (20°C ± 5°C)
Structure: Die-cast aluminum
Environment: Indoor/outdoor
Temperature: 23°F ~140°F (-5°C ~ 60°C); -13°F ~140°F (-25°C ~ 60°C) (With heater)
Box Dimensions: V1405-7 (L×W×H): 19.49"×6.50"×6.26" (495 mm×165 mm×159 mm)
Unit Weight: V1405-7: 4.19 lbs. (1.9 kg)
Shipping Weight: V1405-7: 4.41 lbs. (2 kg)