Surveillance System Infinova

• 10 bits digitally encoded video transmission
• NTSC, PAL, and SECAM auto compatible
• Surface mount technology
• LED indicators for monitoring of system operating status
• On- board DIP switch selection of RS-422, RS-485 (2 or 4 wires), Manchester/Biphase
• On-board DIP activation of 120 Ohm termination resistor
• Surge protection
• Highest optical dynamic range
• Immune to EMI and RFI
• Dense structure for easy installation
• Hot swappable rack mount cards
• Automatic re-settable fuses, short circuit protection
• 12 VDC or 24 VAC power supply
• Industry standard connectors
• No user adjustments required

N3554TA-1D1B-M: FO MM TRX, 4V In, 1D IO +1 RS-232 IO,Module, 12VDC/24VAC
N3554TA-1D1B-R: FO MM TRX, 4V In, 1D IO +1 RS-232 IO,Card, 2-Slot

N3554RA-1D1B-M: FO MM TRX, 4V Out, 1D IO +1 RS-232 IO,Module, 12VDC/24VAC
N3554RA-1D1B-M: FO MM TRX, 4V Out, 1D IO +1 RS-232 IO,Card, 2-Slot

N3754TA-1D1B-M: FO SM TRX, 4V In, 1D IO +1 RS-232 IO,Module, 12VDC/24VAC
N3754TA-1D1B-R: FO SM TRX, 4V In, 1D IO +1 RS-232 IO,Card, 2-Slot

N3754RA-1D1B-M: FO SM TRX, 4V Out, 1D IO +1 RS-232 IO,Module, 12VDC/24VAC
N3754RA-1D1B-R: FO SM TRX, 4V Out, 1D IO +1 RS-232 IO,Card, 2-Slot

 

Note:

1. Distance is limited to fiber loss, splices, chromatic dispersion and bandwidth
2. Range estimates are based on 1.0dB/km @ 1310nm on MM fiber, 0.35dB/km @1310nm and 0.25dB/km @1550nm on SM fiber, and include a 3dB safety factor
3. Range estimates for multimode are based on 1000MHz/km fiber

ACCESSORIES
Power Supply
N3921-12D-1: 12 VDC (120 VAC), 10 VA
N3921-12D-2: 12 VDC (230 VAC), 10 VA
N3921-24A-1: 24 VAC (120 VAC), 20 VA
N3921-24A-2: 24 VAC (230 VAC), 20 VA

Video Performance
Video Channel: 4
Video Input: 75 Ohm
Video Voltage: 1.0 Vp-p
Bandwidth: 5Hz~6.5 MHz
Differential Gain: 1% (typical)
Differential Phase: 1° (typical)
Signal-to-noise Ratio: 67 dB (weighted)
PCM Encoding: 10 bits

Data Performance
Data Rate: DC to 115.2 kbps
Bit Error Rate: <10^-9

Optical Performance
Fiber Type: Multi-mode
Output Power: -12 dBm (typical)
Receiver Sensitivity: -19 dBm (typical)
Wavelength: 1310/1310 nm
Connector: ST

Fiber Type: Single-mode
Output Power: -5 dBm (typical)
Receiver Sensitivity: -22 dBm (typical)
Wavelength: 1310/1550 nm
Connector: FC

LED Indicators
Power On: Red
Optical Link Loss: Red
Video Input/Output: Green
Data Input/Output: Green

General Parameters
Operating Temperature: -40°F ~ 167°F (-40°C ~ 74°C)
Storage Temperature: -40°F ~185°F (-40°C ~ 85°C)
Operating Humidity: 0 ~ 95% RH (non-condensing)
Card Dimensions (W x H x D): 1.57" x 5.08" x 6.73"(40 mm x 129 mm x 171 mm)
Module Dimensions (W x H x D): 1.73" x 6.22" X 7.87"(44 mm x 158 mm x 200 mm)
Power Consumption: 5.0 W
Card Weight: 1.25 lbs. (0.57 kg)
Module Weight: 2.31 lbs. (1.05 kg)
Mean Time Between Failures: >100,000 Hrs

Compliance: FCC, CE, UL, cUL,
ISO 9001:2000